Tube Crush ATS 3
Test several samples at the same time
The ATS 3 heads is the tool to control the weld strength of plastic and metal-plastic pipes directly on the production line or in the laboratory.
The weld integrity is verified by the absence of leakage under the effect of a crushing force applied to the sample to be tested.
It’s a simple, fast, affordable and completely reliable test deployed in various packaging manufacturers.
After-sales
In-house ACRN service
COFRAC
Traceable calibration
Experts
Technical support
Fast
Shipping
The product
Description
Like the ATS, the ATS 3, our multi-tube tester, is indispensable for reliable quality control of your welds, which may show defects after heat sealing. Theses three different compartments give you the simultaneous control of three similar samples, or even different ones thanks in particular to an independent control of the pressure if each manometer. This is very useful in the event of a high frequency of checks or in case of a significant spot check following a complaince problem. This is very useful in the event of a high frequency of checks or in case of a significant spot check following a complaince problem.
Thanks to it’s numerous press and it’s intuitive design, it allows an excellent repeatability of measurements.
As a reminder, it allows to two kinds of tests to be set up:
- Micro-leak test which increases with pressurization and causes bursting
- Burst test to determine the strength of welds.
Profits
- Fully pneumatic, low maintenance
- Depression adjustment specific to each pressure gauge
- Easy to use
- Realization your tests in complete safety thanks to the transparent polycarbonate safety cover preventing its opening during the test and the start of a cycle once opened
- Positionning rules fot simultaneous testing of 3 same samples
- Delivered with 2 press of different size according to the tube diameter
Options
| Special anvils on request |
| Calibration Kit |
| Anti-marking kit |
Presser
Specifications
Technical specifications
| Ecrase tube | Crushes PVC tube on rigid metal frame, transparent unbreakable polycarbonate casing |
|---|---|
| Alimentation | Compressed air from 0 to 10 bars |
| Lecture | Graduated manomaters from 0 to 10 bars |
| Force de pression | From 50 to 1 000 N |
| Réglage pression | Adjustment dial pressure regulator |
| Temporisation | Adjustable from 0 to 30 secondes |
| Raccordement alimentation | Connection to the compressed air network by Rislan tube 8mm outside diameter |
| Dimensions utiles | L520xD310xH400 mm |
| Poids | 30 kg |
Calibration
Reliable measurements over time
ACRN calibrates your instruments in its laboratory or directly on your site, with a COFRAC-traceable certificate.
ACRN range
Related products
Your project
Need a quote or information about this product?
Tell us about your application and your measurement constraints: we will get back to you quickly with a tailored offer.