IP XPORT
Communicate with your ACRN devices in ethernet / IP
IPXPORT lets you pass information from a serial port (COM port) of an ACRN machines to an Ethernet network.
In a few moments, connect your devices to your network.
You can take advantage of the features of the communication protocol of ACRN devices:
- Sending of the measured value on pulse, automatically or on interrogation
- Time stamp, unit, …
Description
In what situations should IP Xport be used?
- “Connected Plants” projects
- Centralization of production control data by connectiong control devices to the network.
- Archiving on a PC in production station
- Implementation of a SPC Plant software or other information system modules
Includes:
- Cable Serial to Serial
- IP Xport Box
- 5V power supply with adaptater
- Connection guide
- Communication protocol guide for ACRN devices
Configuration of the serial link
| Data bits | 5,6,7,8 |
| Stop bits | 1,2 |
| Check bit | None, Even, Odd, Space, Mark |
| Baud rate | 600 bps~230.4Kbps |
Hardware compatibility:
- Torquemeters NBA, and NCA
- Terminal XA et XAm
- Vacuum box CTEX
- Tube seal tester ATS-X
- Aerosol pressure controler PA-X
Ethernet Specifications
| Work mode | TCP Serveur, TCP, UDP Client, UDP Serveur, HTTPD Client |
| Maximum client IP | 16 clients max in server mode |
| DHCP supported | Yes |
| Connexion control | Heartbeat functionnality |
Information complémentaires
| Connector A | COM Port (SERIAL) SUB-D female (for ma cable) 9 points |
|---|---|
| Connecteur B | Ethernet Port RJ45 |
| Dimensions | 71 x 60 x 25mm |
